Bulgaria Beipu devices starter bundle (2000 mAh) (v2)
Beipu devices advice for Bulgaria, covering which to pick, what to look for and where the trade-offs actually sit.
Most Bulgaria buyers start with a well-known brand name and then discover that fit and coil availability matter far more. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help.
Most Bulgaria buyers start with a well-known brand name and then discover that fit and coil availability matter far more. What surprised us most was how little the 1.0 Ω mesh coil changes the draw character compared with the 55:45 PG/VG liquid sitting in the chamber.
Replacement coils are widely available, and the 1.0 Ω mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own. What surprised us most was how little the 1.0 Ω mesh coil changes the draw character compared with the 55:45 PG/VG liquid sitting in the chamber.
Comparing this against a 55:45 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 1.6 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. Expect roughly 1514 full puffs from a charge at 10 mg/ml, based on average session length in our testing.
The throat hit is noticeably firmer than a 55:45 PG/VG blend, so if you prefer a smoother draw, mix accordingly. Pricing in Bulgaria shifts with import duty, so the figures here reflect current BGN rates rather than a fixed list price. Airflow control on the Innokin Sceptre is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank.
Two things to check before ordering: the USB-C socket on the base and whether the 1.0 Ω mesh coil is the newer generation. Battery behaviour is where the Innokin Sceptre earns its keep: the 2500 mAh cell holds a usable charge for most of a day at 90 and recharges over USB-C. We would pair the Innokin Sceptre with a 55:45 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.
Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. Vapour production is more than adequate at 90, and pushing beyond that adds heat rather than anything worth carrying. Expect roughly 1514 full puffs from a charge at 10 mg/ml, based on average session length in our testing.
Specifications
Specifications vary by batch, so treat these figures as the reference point rather than a guarantee for every unit.
| Reference model | Innokin Sceptre |
|---|---|
| Brand family | Lost Vape |
| Battery capacity | 2500 mAh |
| Power range | 90 W |
| Liquid capacity | 1.6 ml |
| Coil | 1.0 Ω mesh |
| Bottle size | 300 ml |
| Liquid ratio | 55:45 PG/VG |
| Nicotine strength | 10 mg/ml |
| Material | polycarbonate |
| Charge port | USB-C |
| Connector | magnetic contact |
| Airflow | dual bottom |
| Mouthpiece | narrow bore |
Flavour and performance notes
A representative profile is Kiwi Lime: tangy, green, described as tart kiwi balanced by lime. On a 55:45 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.0 Ω mesh mark before the coil begins to mute it.
Practical considerations in Bulgaria
Availability in Bulgaria is the factor that decides most outcomes here. Confirm the 1.0 Ω mesh and the USB-C are both in stock before committing, and check that the magnetic contact matches your existing device if you already own hardware. Duty and BGN rates move, so treat prices as current rather than fixed.
Our advice is to order one, use it for a fortnight, and only then decide whether to stock up.
